Shopping Cart(0)

SIENAD10HM3

ModelSIENAD10HM3

Half-width (6.6" x 17")

Single Socket SP6 (LGA 4844), supports AMD EPYC™ 8004 series processors

10 DIMM slots (2DPC/1DPC), supports DDR5 RDIMM

2 Slim cool edge (PCIe5.0 x16)

1 MCIO (PCIe5.0 / CXL1.1 x8 or 8 SATA 6Gb/s)

IPMI

立即查詢

Specification

Physical Status
Form Factor Half-Width
Dimensions 6.6" x 17"
Processor System
CPU Supports AMD EPYC™ 8004 series processors
Socket Single Socket SP6 (LGA 4844)
Chipset System on Chip
System Memory
Supported DIMM Quantity 10 DIMM slots (2DPC/1DPC)
Supported Type Supports DDR5 288-pin RDIMM
Max. Capacity per DIMM 96GB (2Rx4)
Max. DIMM Frequency 4800 MHz
Voltage 1.1V
PCIe Expansion Slots (SLOT7 close to CPU)
PCIe x 16

SLOT2: Slim cool edge (PCIe5.0 x16)

SLOT1: Slim cool edge (PCIe5.0 x16)

Other PCIe Expansion Connectors
M.2 slot 2 M-key (PCIe5.0 x4 or SATA 6Gb/s), supports 22110/2280 form factor
Others

1 MCIO (PCIe5.0 / CXL1.1 x8 or 8 SATA 6Gb/s)

1 OCuLink (PCIe3.0 x4)

SATA/SAS Storage
PCH Built-in Storage

AMD EPYC 8004 (10 SATA 6Gb/s):

1 MCIO, 2 M.2

Additional SATA Controller

ASM1061R (2 SATA 6Gb/s):

1 OCuLink

Ethernet
OCP slot

1 OCP NIC 3.0 (PCIe5.0 x16)

2 OCP NIC 3.0 (PCIe5.0 / CXL1.1 x16)

Server Management
BMC Controller ASPEED AST2600
IPMI Dedicated GLAN 1 Realtek RTL8211F for dedicated management GLAN
Graphics
Controller ASPEED AST2600
VRAM DDR4 512MB
Rear I/O
UID Button/LED 1 UID button w/ LED
VGA Port 1 mini DisplayPort (VGA)
USB 3.2 Gen1 Port 2 Type-A (USB3.2 Gen1)
RJ45 1 dedicated IPMI
Internal Connector/Headers
Power Connector 1 Mini-Fit (2x4 pin, ATX 12V), 1 Micro-Hi (2x6 pin, ATX 12V)
Other Power Connectors 1 (6-pin) for HDD power
Auxiliary Panel Header 1 (9-pin): chassis intrusion, system fault LED, locate, SMBus
System Panel 1 (9-pin): power switch, reset switch, system power LED, HDD activity LED
COM Header 1
VGA header 1
Speaker Header 1 (4-pin)
Fan Header 6 (6-pin)
Thermal Sensor Header 1
TPM Header 1 (13-pin, SPI)
SGPIO Header 2
HSBP 1
SMBus header 1
PMBus header 1
IPMB Header 1
Clear CMOS 1 (contact pads)
USB 3.2 (Gen1) Header 1 (19-pin, 2 USB3.2 Gen1)
NMI Header 1
LED Indicators
Standby PWR LED 5vsb 1 (5VSB)
80 Debug Port LED 1
Fan Fail LED 6
BMC heartbeat LED 1
System BIOS
BIOS Type AMI UEFI BIOS; 256 Mb SPI Flash ROM
BIOS Features

ASRock Rack Instant Flash, ACPI 6.4 and above compliance wake up events, SMBIOS 3.5.0 and above,

Plug and Play(PnP)

Hardware Monitor
Temperature CPU, MB, Card side, TR1 Temperature sensing
Fan

Fan Tachometer

Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU Temperature)

Fan Multi-Speed Control

Voltage VDDCR_CPU, VDDCR_SOC, VDDIO, VDD_18_S5, VDD_33_S5, VDD_11_S3, +3V, +5V, +12V, +BAT, +1V8SB, 3VSB, 5VSB
Environment
Temperature Operation temperature: 10°C ~ 35°C / Non operation temperature: -40°C ~ 70°C
Humidity Non operation humidity: 20% ~ 90% ( Non condensing)
Model SIENAD10HM3